How To Install dell wd15 firmware [Guide]

  In this guide, we will show you the steps to install the ultimate introduction of How To Install dell wd15 firmware [Guide] Driver Installation Guide for Dell Docking Station WD15 Summary: Find information about how to download and install device for dell wd15 firmware Docking Station WD15 on a PC. Installing or updating the drivers to the latest version ensures optimal performance of the docking station.See less Follow Step By Step, Lats Start Topic.

Dell Docking Station WD15 Resolution

dell wd15 firmware, The Dell Docking Station WD15 is a device that links all your electronic devices to your PC using a USB-C cable interface. Connecting the PC to the docking station allows you to access all peripherals (mouse, keyboard, stereo speakers, external hard drive, and large-screen displays) without having to plug each one into the dell wd15 firmware on PC.

Note: The dell wd15 firmware only works with DisplayPort over USB-C or Thunderbolt protocols and is not compatible with all USB-C ports.

-Advertisement-

Note: dell wd15 firmware PCs that require more than 130 W power input must also be connected to their own power adapter for charging and operating at full performance.

Manually Download and Install for the dell wd15 firmware

dell wd15 firmware Dell recommends installing the following BIOS, firmware and drivers step-by-step in the prescribed order to ensure optimal performance.

dell wd15 firmware Search for model name or enter the Service Tag of your PC on the Dell Drivers & Downloads page. Select the Operating System to view all available updates for your PC.

1. Flash the latest Basic Input / Output PC (BIOS) available for the PC. This is posted under the “BIOS” section.

1. Restart the PC.

1. Install the Intel Thunderbolt Controller Driver available for the PC. This is posted under the “Chipset” section.

Note: This applies to the PC that has a Thunderbolt 3 (USB-C) port.

4. Install the Intel Thunderbolt 3 Firmware Update available for the PC. This is posted under the “Chipset” section.

Note: This applies to the PC that has a Thunderbolt 3 (USB-C) port.

5. Install the Intel HD Graphics Driver available for the PC. This is posted under the “Video” section.

6. Install the RealTek USB GBE Ethernet Controller Driver available for the PC. This is posted under the “Docks & Stands” section.

7. Install the RealTek USB Audio Driver for the Dell Thunderbolt™ Dock and Dell Dock available for the PC. This is posted under the “Docks & Stands” section.

8. Restart the PC.

9. After the software update process completes, connect the AC adapter to the WD15 dock first and then attach the USB-C cable to the PC and update the Dell Dock firmware before using the docking station.

dell wd15 firmware Automated Driver Update for Dell Docking Station WD15

dell wd15 firmware Dell highly recommends the following applications to automate the installation of BIOS, driver and critical updates specific to your PC and docking station. These applications are available to dell wd15 firmware download on dell wd15 firmware & Downloads page.

• The dell wd15 firmware Update application is supported on Dell XPS laptops and Dell Venue

• The dell wd15 firmware Command | Update application is supported on Dell Precision, XPS and Latitude laptops.

Note: The WD15 dock firmware will need to be updated manually as it is not delivered via these applicatons.

Note: If your PC has a third party anti-virus software running, it is suggested that you disable the anti-virus before running DCU and ensure it isn’t reactivated during the update process.

Update Firmware on Dell Docking Station WD15

• Caution: Ensure your dell wd15 firmware PC has the MOST CURRENT BIOS REVISION installed BEFORE Installing the Dock Firmware update. (If you are unsure, see driver update information below.)

Note: Ensure that the Dell Docking Station WD15 is connected to your PC to update firmware of the docking station.

• dell wd15 firmware Station WD15 setup requirement: First, connect the AC adapter to your Dell Docking Station WD15 and then attach the USB-C cable to your PC.

Note: Do not disconnect the dock from your PC or remove the AC power from your dock during the firmware update procedure.

• Download the dell wd15 firmware (WD15) Firmware Update Utility under the “Docks & Stands” section to your local driver and run the .exe file as administrator. You will need to uncheck the box “Show all Drivers for Service Tag *****” in order to see the firmware.
• Click the OK to complete the component update on Windows OS and the PC will reboot into pre-boot environment to update the rest firmware components. (See Figures 1 – 6)

dell wd15 firmware & Station Firmware Update

• dell wd15 firmware update setup screen

Dell Docking Station Firmware initialization

• dell wd15 firmware Initialization

Dell Docking Station Firmware Update in Progress

• dell wd15 firmware update in progress

Dell Docking Station Firmware PC Reboot Notification

• dell wd15 firmware PC reboot notification

Dell Docking Station Firmware Progress After First Reboot

• dell wd15 firmware progress after 1st reboot

Dell Docking Station Firmware Update had Completed

• dell wd15 firmware update had completed.

• After all the firmware components are updated, your PC will reboot to Windows OS.

• Disconnect your dell wd15 firmware from the PC and remove AC adapter from the docking station.

• Connect the AC adapter back to your Dell Docking Station WD15 and then attach the USB-C cable to your PC.