FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File

  In this guide, we will show you the steps to install the FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File Download on your MediaTek device using the Flash Tool. There could be quite a few reasons as to why you would prefer to manually install the FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File. First off, the OEMs usually release the OTA updates in batches, hence not everyone gets the update at one go. However, if you manage to get hold of the update package, then you could manually flash the firmware file and install the latest OS update FIGI NOTE 1 PRO in to your device.

Important & Benefits For FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File

Download the latest official firmware for FIGI mobile phones & tablet. Updated from FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File Download 100% Tested Pin Remove,Password Remove,Pattern Remove,LCD FIX Display Problems,Bootloop,Hang On Logo,Dead Recovery,After Flash Dead,After Flash Display/LCD White Fix, FRP Remove Fix Operating system optimization, hang logo fix , bootloop fix and unbrick.

FIGI NOTE 1 PRO About Phone & Specifications:

  • Model : NOTE 1 PRO
  • Brand : FIGI
  • Cpu Type : MT6757 (MediaTek Helio P25)
  • OS version : Android 9.0 (Pie)
  • Password : NO
  • Build Version : 新指纹
  • File Size : 1.6GB
  • File Type : Without Password & Free Download

FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File

  • 新指纹-FIGI-NOTE_1_PRO-ANDROID9-0_20210310 | Download

FIGI NOTE 1 PRO Notice Flash Firmware Update

Read Me First ⇛ You should always back up your data before you begin flashing new firmware files to your smartphone or tablet. All of your Importent documents, pictures, music, videos, etc. should be still on your device after you have updated the firmware, but you may need to restore the contacts and applications from a backup Then Flash/Firmware Upgrade Thanks.

How To Flash Firmware Update FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File Guide & Software Upgrade Manual

MediaTek MTK CPU Flashing Procedure:

SP_Flash_Tool_exe_Windows Usage:- SP_Flash_Tool_exe_Windows is used to Flash MediaTek MTK CPU based Mobile & Tablet.

Note-: Make sure your device is atleast 30 percent charged to perform flashing.

  1. Install the Drive on your computer, Driver_Auto_Installer_EXE_v5.1632.00(if already installed, forget this step.)
  2. Decompress the tool:SP_Flash_Tool_exe_Windows, decompress the software zip:File, Firmware, Flash File, Official ROM, Stock ROM etc...
  3. Open the flash tool from tool files, and clink flash_tool.exe(as bellow pic shown)
  4. Next, pls choose "Download Only" & "Firmware Upgrade" at the 3th Position (Please Note:  Cannot choose “Formart All+Download" mode,it would clean all specs like antenna and google key in you phone, even you cannot recover by yourside, pls never do it !! )
  5. Above all finshed, pls clink the 4th position ---- the botton of "Download"
  6. Turn off your phone, and connect your computer with USB cable. When the yellow progress Bar 100% and "OK" popup as bellow picture, Congratulations you have FIGI NOTE 1 PRO Official Stock ROM Firmware Flash File upgraded sucessfully.

Pay Attention : it is not within the scope of the warranty if any defects from upgraded without authorization.

Note : If You Have Any Problems Then Comment Below Or Message Us What"s App +9779844571881, We Try Our Best To Help You. If You Found This Post Helpful Then Don't Forgot To Like And Share.

Post a Comment

All Kind Of Free & Paid Premium Android Software, Official Firmware, Combination, Flash File, Stock ROM, Android Root File,How to Root Android Devices, Smartphones, Custom ROM, iCloud
Bypass, iPhone Jailbreak etc...

Previous Post Next Post