Network Unlocks

Firmwares

How To Flash/Firmware Upgrade Spreadtrum/SPD CPU With CM2/Chinese Miracle 2 Full Guide

12 comments
>On this post you will find How To Flash/Firmware Upgrade Spreadtrum/SPD CPU With CM2/Chinese Miracle 2 Full Guide. you have this problems pin,password,pattern,FRP,Bootloop,Hang on logo,Dead problems,More problems Suppord. How To Flash/Firmware Upgrade Spreadtrum/SPD CPU With CM2/Chinese Miracle 2 Full Guide you will flashed this dongle/tool i am sure your problems solved follow step by step.

#About And Fetures CM2/Chinese Miracle 2 ?

1. Identify (Service-Boot)
2. Read firmware ( SC-PAC )
3. Write Firmware ( SC-PAC )
4. Reset Settings Format/FS
5. Reset-FRP Remove.
6. Flash Erase 7. NVM operations: Read, Write, Clear.
8. Repair Security (Normal and Flash Mode)
9. SP Unlock.
10. EMMC Test.
11. HW Info Read/Write.
12. Service Operations.
13. Firmware Reader Updated New Yypes Supported.

#How To Flash/Firmware Upgrade Spreadtrum/SPD CPU With CM2/Chinese Miracle 2 Full Guide ?

1. First Extract Your Firmware Winrar,7Zip.

2. Open CM2 SPD Tool.

3. Select Your Boot see on picture.

4.Select firmware/ f lash file PAC File with CM2.

5.after select pac. File Click Flash.

6. Power OFF Phone Wait 5 Sec.

7.You Find boot key your model And Press Vol-/Vol+ and Vol+/Vol- Same Time.

7. Plug in USB Cable.

8. Your Progress Start.

9. After Download Complete ON PC Screen.

10. Unplug Cable And Power ON And Startup Your Phone Enjoy!!!.




NOTE: If You Have Any Problems Then Comment Below Or Message Us, We Try Our Best To Help You. If You Found This Post Helpful Then Don't Forgot To Like And Share.


12 comments :