Network Unlocks

Firmwares

InnJoo Halo X LTE SC9832A Tested Firmware/flash file Download BY GSM Abinash

No comments
>>Today, i am showing InnJoo Halo_X_LTE thish file i think thish file is exclusive firmware but i will share thish file cm2 readed flash file 100% tested and how to flash. thish phone boot not accepeted but i have thish boot solution. so I am share thish firmware and boot solutions. lets start.

#About Phone.

1. Model Name  : Halo_X_LTE
2. Model Brand : InnJoo
3. Model Device: Halo_X_LTE
4. AndrVersion : 6.0
5. BaseBand CPU: HALO_X_LTE
6. Project Ver : Halo X LTE-6.0-InnJoo-20161227-V1
7. Model Ext   : Halo X LTE
8. CPU Type : SC9832A
9. File Size : 783.1MB
10. File Type : Free



#Operation : Read FullFlash

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!


-#Wait phone connected ... 

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Halo_X_LTE
Model Brand : InnJoo
Model Device: Halo_X_LTE
AndrVersion : 6.0
BaseBand CPU: HALO_X_LTE
Project Ver : Halo X LTE-6.0-InnJoo-20161227-V1
Model Ext   : Halo X LTE

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2156 MiB
Saved to : C:\Users\GSM-Abinash\Desktop\New folder\HALO_X_LTE_Halo_X_LTE_6.0_Halo_X_LTE-6.0-InnJoo-20161227-V1_Halo_X_LTE\
Done!

Elapsed: 00:16:46

Reconnect Power/Cable!


#Why is it important file for?

1. Pin Remove.
2. Pattern Remove.
3. Password Remove.
4. Hang On Logo Problem Solve.
5. Boot Logo Promlem Solve.
6. Dead Fix Vibrate Only Solved.
7. FRP Remove. Tested By GSM-Abinash



#How to write this file?

*GUIDE FOLLOW STEP BY STEP.

1. Open CM2 SPD Tool.
2. Select CPU SP [SC983x] eMMC [Generic Android 6.x]
3. Go to the Flash tab and Select PAC File.
4. Click Flash Blew.
5. Power OFF Phone and Open Mobile Then Short Vol Boot Key Point 1 & 6 and Press Vol+ Vol- Same Time.


6. Plug USB Cable.
7. After Plug USB Cable Progress Start.
8. After Download Complete ON PC Screen.
9. Unplug Cable And Power ON And Startup Your Phone.




NOTE: If You Have Any Problems Then Comment Below Or Message Us, We Try Our Best To Help You. If You Found This Post Helpful Then Don't Forgot To Like And Share.





Download Link

No comments :

Post a Comment